All our PRO, PRO LT and PRO Divide bags are interchangeable on the Carbon Fiber Frame and PRO Suspension.STEP 1:Start by unclipping your side compression straps, and load lifter straps from the bag.STEP 2:Unclip the load stabilizer straps at the side
Our Load Sling gives you the ability to carry gear, meat, or anything bulky between the frame and the bag. This is handy when your bag is full, and you need to take out a load of meat.STEP 1:The first step is to disengage the load lifter straps that
On the bottom of all PRO, PRO LT and PRO Divide packs, there are webbing loops in each corner of the bottom panel. This allows you to connect your Bow Holder on the left, right, or back of the pack. Your Bow Holder comes with a top strap with a quick
Eight internal webbing loops on the PRO, PRO LT and PRO Divide bags come installed with four extra removable compression straps. This internal lashing system is perfect for securing heavy items close to the frame inside your bag.
If the extra space of the top lid is not required, it may be removed. Unbuckle or unclip the top-lid compression straps and remove the slotted clip from the webbing loop. Cinch the top of the bag tight, route the connection straps over the top of the
Washing your pack is easy and cleaning it often will reduce scent and noise. First, empty your pack, secure all hook-and-loop tabs, and completely disconnect the bag, shoulder straps, and waist belt from the Carbon Fiber Frame. You may wash the bag a
This is most likely due to having the lower bag attachment straps hooked up to the incorrect loops on the bottom of the bag. If you look up the back of the pack another 4”, another set of loops will give you enough pull to tighten the bag and prevent
Due to hardware updates to our 2017 packs, you may need to contact customer service to acquire the appropriate adapter kit for your pack. If you purchase a new 2017 ICON Pro or ULTRA bag to put onto a pre-2017 suspension, you will need to get an adap